The key to consistent and fast honing is repeatability – and the Mk.II honing guide delivers it in spades. Whether you're a sharpening veteran or just starting out, this versatile guide lets you concentrate on sharpening without worrying about controlling blade angle at the same time. 

The standard head uses a clamping bar that registers on the face of the blade. It accepts flat and tapered blades between 1/2" and 2 7/8" wide and up to 15/32" thick, including skew blades. It hones bevel angles from 15° to 54° and back bevels from 10° to 20°.

The narrow-blade head clamps blades from the sides with parallel jaws to ensure they stay square to the jig. It will even hold chisels that are triangular in cross section. It accepts blades from 1/8" to 1 1/2" wide, holding bevel-edged chisels up to 15/32" thick and square-edged blades up to 11/32" thick. It hones bevel angles from 15° to 40° and back bevels from 10° to 20°.

Offering an impressive range of angle settings, the integral blade angle registration jig squares the blade and sets the bevel angle in one easy step. A scale and sighting mark help center blades when using the standard head; the narrow-blade head is self-centering. Once the blade is clamped, the jig slides off the guide.

The interchangeable rollers attach to the clamping heads with a single thumbscrew. The eccentric axle mount lets you add a micro-bevel to any angle setting with a simple turn of a knob. The barrel-shaped camber roller lets you rock the guide slightly to hone a slight curve or camber into a blade edge, eliminating blade tracks when planing.

Don't forget the !

[TABS]

Features

• Hone bevel angles from 15° to 54° and back bevels from 10° to 20°
• Combined, the two heads accept blades from 1/8" to 2-7/8" wide and up to 15/32" thick
• The narrow-blade head clamps blades from the sides with parallel jaws to ensure they stay square to the jig
• Integral blade angle registration jig squares the blade and sets the bevel angle in one easy step
• Interchangeable rollers easily attach to the clamping heads with a screw
• This set offers completely predictable results for a wide variety of blades. It is useful in the shop of any woodworker who works with hand tools

Specs

Standard head blade capacity: between 1/2" and 2 7/8" wide and up to 15/32" thick
Narrow-blade head capacity: between 1/8" to 1 1/2" wide, holding bevel-edged chisels up to 15/32" thick and square-edged blades up to 11/32" thick

Includes

• Standard head
• Narrow-blade head
• Angle registration jig
• Straight roller base
• Camber roller base

Video

[/TABS]